| Issue |
E3S Web Conf.
Volume 356, 2022
The 16th ROOMVENT Conference (ROOMVENT 2022)
|
|
|---|---|---|
| Article Number | 03054 | |
| Number of page(s) | 3 | |
| Section | Thermal Comfort and Natural Ventilation | |
| DOI | https://doi.org/10.1051/e3sconf/202235603054 | |
| Published online | 31 August 2022 | |
An Analysis of Natural Ventilation and Ventilation load in relation to Occupants’ window opening Behaviour in residential Building
1 Ph.D. Candidate, Hanyang University, Department of Architectural Engineering, Seoul, Korea
2 Master’s Course, Hanyang University, Department of Architectural Engineering, Seoul, Korea
3 Professor, Hanyang University, Department of Architectural Engineering, Seoul, Korea
* Corresponding author: junpark@hanyang.ac.kr
For reducing the energy consumption in buildings, each country strengthened the standard of insulation without the standard of ventilation. However, because of it, sick building syndrome has occurred. Accordingly, the importance of ventilation in building has been increased to reduce the polluted indoor air and promote the better Indoor Air Quality. The previous study has only focused on the window opening behaviour and developed the machine learning algorithm of window opening. However, it is the ventilation rates that affects Indoor Air Quality. Therefore, in this study, the ventilation rates was derived from carbon dioxide decay method. From this ventilation behaviour, occupants are not only controlling their indoor environment, but also making the ventilation load in their building.
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.