Issue |
E3S Web Conf.
Volume 356, 2022
The 16th ROOMVENT Conference (ROOMVENT 2022)
|
|
---|---|---|
Article Number | 04020 | |
Number of page(s) | 4 | |
Section | Airflow Visualization, Measurement and Simulation | |
DOI | https://doi.org/10.1051/e3sconf/202235604020 | |
Published online | 31 August 2022 |
CFD modeling of a self-oscillatory airflow regime in the test ventilated room with plane supply opening
Peter the Great St. Petersburg Polytechnic University, 195251, 29 Politechnicheskaya Str., St. Petersburg, Russian Federation
* Corresponding author: ivanov_ng@spbstu.ru
The current contribution presents the results of numerical simulation of the airflow and heat transfer in a model room of rectangular shape ventilated with a single plane jet under the conditions of the experiment by Mataoui et al. (2001). The 2D and 3D unsteady Reynolds-averaged Navier-Stokes approaches were used. Numerical solutions were obtained with the CFD package ANSYS Fluent based on the finite volume method with the cell-centered variable arrangement. The position of the air supply nozzle corresponds to the self-oscillatory experimental conditions. The results of the computational data validation are reported. Effects of the low-frequency velocity oscillations on the heat transfer parameters are discussed.
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.