Issue |
E3S Web Conf.
Volume 363, 2022
XV International Scientific Conference on Precision Agriculture and Agricultural Machinery Industry “State and Prospects for the Development of Agribusiness - INTERAGROMASH 2022”
|
|
---|---|---|
Article Number | 02008 | |
Number of page(s) | 11 | |
Section | Precision Farming Software. Agroecology | |
DOI | https://doi.org/10.1051/e3sconf/202236302008 | |
Published online | 14 December 2022 |
Geotechnical engineering and process of digitalization – BIM modelling
1 Czech Technical University in Prague, 1580/3, Jugoslávských Partyzánů, 16000, Prague, Czech Republic
2 Geosyntetika Ltd., 1798/5, Myslivečkova Prague, 16200, Czech Republic
* Corresponding author: Ivan.Vanicek@cvut.cz
The digitization process has been going very fast lately as well BIM modelling, as both are strongly connected. The paper briefly evaluates this process from different levels, with the main focus on the conceptual level. The 3D geotechnical model of the ground comes to the fore, as this ground plays an important role also in the process of the BIM because practically all building structures are situated on this ground. Since the EN 1997 Geotechnical design also uses geotechnical and computational models, their connection with the BIM process is very useful and brings new possibilities. Especially from the point of view of connecting the design of the superstructure with substructure and ground and thus the presentation of the result in BIM model of the whole building. BIM models are presented not only for foundation structures, but also for earth structures and their advantages are shown, especially from the view of the decision-making process, as in the design and implementation phase so in throughout the service life of the building.
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.