| Issue |
E3S Web of Conf.
Volume 365, 2023
IV International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2022)
|
|
|---|---|---|
| Article Number | 01001 | |
| Number of page(s) | 10 | |
| Section | Ecology, Hydropower Engineering and Modeling of Physical Processes | |
| DOI | https://doi.org/10.1051/e3sconf/202336501001 | |
| Published online | 30 January 2023 | |
Technological foundations for solving problem of metallurgy and TPP waste utilization for development of "Green" technology for composite cements production
Institute of General and Inorganic Chemistry of Academy of Sciences of the Repuclic of Uzbekistan, Tashkent, Uzbekistan
* Corresponding author: gulrukh-begjanova@rambler.ru
The chemical-mineralogical compositions and physic-chemical properties of slag waste from the Angren TPP and Uzmetkombinat JSC were determined. A Conclusion was issued on their suitability for use as additives in cement and the possibility of using them for producing new types of hybrid additives for the production of composite Portland cements. With different combinations and ratios of Portland cement clinker, natural gypsum stone, and hybrid additives, the compositions of composite Portland cements were obtained and optimized, and Conclusions were issued on their compliance with the requirements of the Standard of the Republic of Uzbekistan Uz DSt 2830:2014 "Portland cement with composite additives. Specifications".
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.