Issue |
E3S Web of Conf.
Volume 365, 2023
IV International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2022)
|
|
---|---|---|
Article Number | 03003 | |
Number of page(s) | 8 | |
Section | Hydraulics of Structures, Hydraulic Engineering and Land Reclamation Construction | |
DOI | https://doi.org/10.1051/e3sconf/202336503003 | |
Published online | 30 January 2023 |
A new technology in cleaning irrigation systems from turbid sediments
“Tashkent Institute of Irrigation and Agricultural Mechanization Engineers” National Research University, Tashkent, 100000, Uzbekistan
* Corresponding author: sarkor.93@mail.ru
The current article considers a method of improvement based on the laws of flow motion in developing resource-saving devices based on the analytical analysis of research on using air ejectors in the national economy. The hydraulic parameters of the jet lift and air ejector are theoretically based, and the connections obtained are tested experimentally. Based on the experiments, the economical parameters of the inlet water lift and air ejector were determined. It was determined that the working pressure of the laboratory water intake device for taking water from a well at a depth of 1 m to a height of 2 m is Hi = 1 m, working flow consumption Q=29.52·10-5 m3/s. Based on theoretical research and experimental data, the consumption characteristics of the structured water lift and air ejector were constructed.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.