Issue |
E3S Web Conf.
Volume 371, 2023
International Scientific Conference “Fundamental and Applied Scientific Research in the Development of Agriculture in the Far East” (AFE-2022)
|
|
---|---|---|
Article Number | 01004 | |
Number of page(s) | 5 | |
Section | Smart Farming and Precision Agriculture | |
DOI | https://doi.org/10.1051/e3sconf/202337101004 | |
Published online | 28 February 2023 |
Obtaining paper from composition of different fibers and its analysis
1 Tashkent State Technical University named after Islam Karimov, 100095 Tashkent, Uzbekistan
2 Tashkent chemical technological institute, 100011 Tashkent, Uzbekistan
3 Tashkent Institute of Textile and Light Industry, 100100 Tashkent, Uzbekistan
* Corresponding author: el.0919@mail.ru
Cellulose and paper products are produced from cotton wool in our republic. Since 1995, the production of these products has increased several times. Nevertheless, 10% of the demand for pulp and paper products in our Republic is met. uring 1988-1993, this growth was 6%, which was 3 times higher than wood pulp production. Extraction of cellulose from annual plants is well developed in China and India. 77% of the world's cellulose obtained from annual plants is produced in these countries. The People's Republic of China gets 50% of its paper output from annual plants. Cellulose was obtained from plants containing cellulose, and their properties were studied. Paper products were obtained from the resulting pulps and its quality indicators were studied based on the standards applied to papers used in industry.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.