| Issue |
E3S Web Conf.
Volume 371, 2023
International Scientific Conference “Fundamental and Applied Scientific Research in the Development of Agriculture in the Far East” (AFE-2022)
|
|
|---|---|---|
| Article Number | 01035 | |
| Number of page(s) | 7 | |
| Section | Smart Farming and Precision Agriculture | |
| DOI | https://doi.org/10.1051/e3sconf/202337101035 | |
| Published online | 28 February 2023 | |
Development of safe products from local waste of oil and fat production
Tashkent State Technical University named after Islam Karimov, 100095 Tashkent, Uzbekistan
* Corresponding author: dilyarakhmatova7@gmail.com
Quicklime is a mixture of pieces of different sizes formed after coarse grinding of the fried product. According to its chemical composition, it is a mixture of calcium and magnesium oxides, the main composition of which is CaO. In small quantities, it may contain undecomposed calcium carbonate, as well as silicates, aluminates and ferrites of calcium and magnesium, formed during the interaction of clay and quartz sand with calcium and magnesium oxides. Quicklime ground lime is a powder product of fine grinding of lump lime. The formulation of the bitumen-replacing mixture consists of the following components, such as oil sludge, gossypol resin, quicklime and technical sulfur. Oil sludge is the most significant waste of the oil industry in terms of mass. A waste disposal methodology towards obtaining a bitumen-replacing mixture for the use of insulating and roofing coatings was created. According to the results, comparative tests of pilot batches of building bitumen -replacing mixture in terms of physical and mechanical characteristics in accordance with State standards 6617-76 showed that almost all 4 experimental batches of building bitumen -replacing mixture gave good performance. However, the experimental batch #4 changed stability and increased bitumen brittleness when 4% quicklime was added. After the test, the experimental batch #3 received good indicators of stability and brittleness.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.