Issue |
E3S Web of Conf.
Volume 463, 2023
III International Conference on Improving Energy Efficiency, Environmental Safety and Sustainable Development in Agriculture (EESTE2023)
|
|
---|---|---|
Article Number | 01023 | |
Number of page(s) | 7 | |
Section | Sustainable Development in Agriculture | |
DOI | https://doi.org/10.1051/e3sconf/202346301023 | |
Published online | 13 December 2023 |
Resource-saving technology of animal fats production: scientific and practical approaches and technological advantages
1 Federal State Budgetary Educational Institution of Higher Education, Moscow State Academy of Veterinary Medicine and Biotechnology - MVA n.a. K. I. Skryabin, 23, Akademika Skryabina St., Moscow, 109472, Russia
2 Federal State Budgetary Educational Institution of Higher Education, Kuban State Technological University, 2, Moskovskaya St., Krasnodar, Russia
* Corresponding author: ansoulev@yandex.ru
Specificity of technological cycle of processing of fat raw materials of animal origin lies in the fact that in the process it is possible to receive not only the main commodity product in the form of melted fat, but also secondary products of production, which include unique and valuable in their properties biologically active substances. The present work is devoted to the development of technology of complex processing of fat raw material, by the example of raw fat of ostrich, which allows to increase the fat yield and minimize production waste. The objects of research were: melted fat of ostrich and products of its processing (greaves and protein hydrolysate), obtained by melting in water (control) and catholite under given conditions and parameters. It is shown that fat melted in catholite is characterized by low values of acid, peroxide and anisidine numbers in comparison with the control. It is established that at processing of fat in catholyte its yield even at the temperature of 55°C was over 64.0%, and at heating up to 100°C - 86.6%. It is argued that realization of repeated melt-out, stipulated by technological solutions, reduces risks of formation of significant amount of fat and protein wastes. It is determined that at repeated consecutive melting of protein fraction with temperature increase up to 75°С and 100°С the percentage of fat yield increases by 11.6 and 19.5 %, respectively. The established dependencies formed the basis for the creation of a technological line for processing of fat raw materials. It is proved that the developed technology of ostrich fat extraction with replacement of aqueous phase by catholyte in the process of fat extraction provides obtaining of fat with a given melting point and qualitative characteristics and can be applied for processing of easily melting animal fats.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.