Issue |
E3S Web of Conf.
Volume 463, 2023
III International Conference on Improving Energy Efficiency, Environmental Safety and Sustainable Development in Agriculture (EESTE2023)
|
|
---|---|---|
Article Number | 03009 | |
Number of page(s) | 5 | |
Section | Improving Energy Efficiency, Fuel and Energy Complex | |
DOI | https://doi.org/10.1051/e3sconf/202346303009 | |
Published online | 13 December 2023 |
Estimation of the reliability of NPP auxiliary needs reservation using the phase change accumulator
Yuri Gagarin State Technical University of Saratov, 77, Politechnicheskaya street, Saratov, 410054, Russia
The installation of a phase transition accumulator at NPP will ensure their effective participation in covering the uneven daily schedule of electrical loads. The heat stored in the accumulator can be used to generate steam for an additional turbine, which, when the NPP is blackout, is able to remove the residual heat from the reactors using the removed energy of the core, the excess of which can be stored in the accumulator and used if necessary. The authors studied the reliability of plants own needs redundancy based on the developed systems for a range of fundamental factors. The results showed that the installation of developed thermal storage systems with an additional turbine at NPPs will significantly improve the safety level of plants.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.