Issue |
E3S Web Conf.
Volume 376, 2023
International Scientific and Practical Conference “Environmental Risks and Safety in Mechanical Engineering” (ERSME-2023)
|
|
---|---|---|
Article Number | 01015 | |
Number of page(s) | 8 | |
Section | I Environmental Risks and Safety in Mechanical Engineering | |
DOI | https://doi.org/10.1051/e3sconf/202337601015 | |
Published online | 31 March 2023 |
Study of the curing process of epoxy-amine compositions by differential scanning calorimetry
1 Bauman Moscow State Technical University, 105005, 2nd Baumanskaya st., 5/1, Moscow, Russia
2 A.N. Nesmeyanov Institute of Organoelement Compounds, Russian Academy of Sciences, 119991, st. Vavilova, 28, Moscow, Russia
* Corresponding author: pavlukovich@yandex.ru
The results of studying the process of curing epoxy resin ED-20 with various amine hardeners by differential scanning calorimetry are presented. The effectiveness of several tertiary amine curing accelerators has been evaluated. The completeness of curing of the epoxy resin and the stoichiometry of the compositions were evaluated by IR spectroscopy.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.