| Issue |
E3S Web Conf.
Volume 376, 2023
International Scientific and Practical Conference “Environmental Risks and Safety in Mechanical Engineering” (ERSME-2023)
|
|
|---|---|---|
| Article Number | 01104 | |
| Number of page(s) | 9 | |
| Section | I Environmental Risks and Safety in Mechanical Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/202337601104 | |
| Published online | 31 March 2023 | |
Features of the structure of metal composite alloy obtained by electric slag remelting with controlled magneto-hydrodynamic action
1 Far Eastern State Transport University (FESTU), 680000, Khabarovsk, Russia
2 Institute of Chemistry, Far Eastern Branch of the Russian Academy of Sciences ; Vladivostok, Russia
3 Institute of Tectonics and Geophysics, Far Eastern Branch of the Russian Academy of Sciences ; Khabarovsk, Russia
* Corresponding author: e_kuzmichev@mail.ru
The results of experimental studies on the use of mineral raw materials containing zirconium oxides without its deep technological processing to create alloys by electroslag remelting are presented. Dependences of the transition of zirconium into remelted low-carbon steel on the magnitude of electromagnetic pulses have been established. It has been experimentally proven that zircon concentrate can be used as an alloying component to obtain alloyed alloys and coatings in electroslag technologies. In this case, the concentrate is used in a comprehensive manner, without additional technological processing.
Key words: zircon concentrate / electroslag remelting / magnetic impulses / mineral concentrates / structure / mechanical properties
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.