| Issue |
E3S Web Conf.
Volume 376, 2023
International Scientific and Practical Conference “Environmental Risks and Safety in Mechanical Engineering” (ERSME-2023)
|
|
|---|---|---|
| Article Number | 02016 | |
| Number of page(s) | 9 | |
| Section | II Environmental and Agricultural Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/202337602016 | |
| Published online | 31 March 2023 | |
Analysis of the possibility of production processes based on modern methods
Tashkent State Agrarian University, 2, University str., 100140 Tashkent province, Uzbekistan
* Corresponding author: d.khakimov@tdau.uz
Comprehensive measures are being implemented aimed at ensuring the comprehensive integration of production enterprises into world markets, increasing the quality and competitiveness of manufactured products, improving the quality management system and product production processes. This article discusses the main essence of the analysis of production processes at engineering enterprises based on statistical methods and the possibility of improving the effectiveness and efficiency of processes based on the fulfillment of the requirements for them. Statistical control of processes by monitoring the description of processes and products, focusing the possibility of processes on the creation of a quality product with a uniform demand, identifies the working procedure for managing the processes of constant production technology and allows to increase the efficiency of the process possibility. Statistical process control is not about checking whether parts are in good condition or not, but about anticipating and trying to prevent the production of poor quality parts. This is done by using control charts as a predictive tool to identify potential inconsistencies.
Key words: Statistical Process Control / IATF 16949 / control chart / prevention / defect / nonconformity
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.