Issue |
E3S Web Conf.
Volume 376, 2023
International Scientific and Practical Conference “Environmental Risks and Safety in Mechanical Engineering” (ERSME-2023)
|
|
---|---|---|
Article Number | 04010 | |
Number of page(s) | 12 | |
Section | IV Environmental Impact of Transport Logistics | |
DOI | https://doi.org/10.1051/e3sconf/202337604010 | |
Published online | 31 March 2023 |
Advanced high-strength steels for automotive engineering
Perm National Research Polytechnic University, Komsomolsky prospect, 29, 614000, Russia
* Corresponding author: aleksmto@gmail.com
Diagrams of supercooled austenite decomposition are constructed for new steels of the Kh2G2C2MF alloying system. They provide the application of a science-based approach to the development and improvement of technological heat treatment processes with the use of furnaces with oxidising atmosphere. It is shown that the bainite transformation cannot exist separately from the martensite transformation even at slow cooling speeds. Regimes of heat treatment are selected, providing a possibility to receive the necessary structure for formation of a required complex of mechanical properties in a wide range. It is established that the most perspective heat treatment regime scheme from the point of view of time savings is continuous cooling from the heating temperature. It is revealed that the main structural components of steels after various heat treatment regimes are bainite and martensite, whose ratio determines the mechanical characteristics. Bainite is carbide-free, which favourably influences the complex of mechanical characteristics. The excessive ferrite and ferrite-carbide mixture formed in the structure at slow rates of continuous cooling in the upper temperature range do not affect the mechanical properties since their amount is insignificant. It is established that new economically alloyed steels with chromium, manganese, silicon, molybdenum, vanadium, and different carbon content belong to third-generation automotive steels, which gives prospects of using this material for manufacturing various automotive parts to improve the entire structure.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.