Issue |
E3S Web of Conf.
Volume 382, 2023
8th International Conference on Unsaturated Soils (UNSAT 2023)
|
|
---|---|---|
Article Number | 16008 | |
Number of page(s) | 6 | |
Section | Partial Saturation and Tailings | |
DOI | https://doi.org/10.1051/e3sconf/202338216008 | |
Published online | 24 April 2023 |
Numerical Investigation of Saturated-Unsaturated Flow and Stability Analysis of Tailings Dams Considering the Influence of Saline Solutions
Department of Civil Engineering, Sharif University of Technology, Tehran, Iran
* Corresponding author: hsadeghi@sharif.edu
A tailings dam is normally constructed through self-consolidation with minimum compaction effort. Accordingly, special attention to the ultimate limit design in assessing the tailings dam instability condition is of primary importance. Furthermore, the existence of pore fluid chemical contaminants with high concentrations makes soil hydraulic and shear resistance properties subject to considerable changes.Therefore, this study aims to investigate the stability of a tailing dam using saturated-unsaturated flow analysis under 0.2 and 0.6 M sodium chloride solutions and pure water as a benchmark. To make the analyses as realistic as possible, recently developed solute-dependent hydraulic conductivity and water retention models are embedded into the numerical software. The results show that the saline-based model has higher pore water pressure than the pure water model due to more rainfall penetration by increasing the pore fluid salt concentration. Furthermore, increasing salt solution concentration enhances the tailing dam's drainagecondition, which leads to an increase in the dam's shear strength and, consequently, the factor of safety. Therefore, the stability of the tailings dam is improved by the combined impact of salt on both the flow and strength.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.