Issue |
E3S Web Conf.
Volume 383, 2023
International Scientific Conference Transport Technologies in the 21st Century (TT21C-2023) “Actual Problems of Decarbonization of Transport and Power Engineering: Ways of Their Innovative Solution”
|
|
---|---|---|
Article Number | 04066 | |
Number of page(s) | 10 | |
Section | Mechanical Engineering and New Energy Technologies | |
DOI | https://doi.org/10.1051/e3sconf/202338304066 | |
Published online | 24 April 2023 |
Development of thermocyclic processing modes for carbon steels used on cold forming tools
Andijan Machine Building Institute, avenue Babur, 56, 170119 Andijan, Uzbekistan
* Corresponding author: dilshodbek.ergashev@mail.ru
In this paper, the effect of thermocyclic processing regimes on carbon tool steels used in cold stamping tools is considered. Thermocyclic processing (TCP) is based on the idea of repeated heating-cooling of steels at a temperature different from conventional heating. In this case, the values of temperature at high and low levels, the heating-cooling rate can be constant. Unlike traditional methods, in thermocyclic processing, each successive cycle occurs with a new structure and phase change. This makes it possible to significantly increase the properties of steel that cannot be achieved with conventional heat treatment due to the combination of different properties that are formed after the final cycle of thermocycling.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.