Issue |
E3S Web Conf.
Volume 385, 2023
2023 8th International Symposium on Energy Science and Chemical Engineering (ISESCE 2023)
|
|
---|---|---|
Article Number | 02015 | |
Number of page(s) | 6 | |
Section | Green Chemical Technology and Energy Saving and Emission Reduction | |
DOI | https://doi.org/10.1051/e3sconf/202338502015 | |
Published online | 04 May 2023 |
Analysis of Abnormal Detection Data of Dissolved Gases in 500kV Transformer Oil
Datang Hydropower Science & Technology Research Institute Co, Ltd, Nanning, Guangxi 530003, China
E-mail: dj_0310@126.com
Transformers may experience various faults during operation. In order to analyze the cause of the fault or even predict it, electrical and chemical methods need to be used for monitoring to ensure the safe and stable operation of the transformer. This article analyzes the phenomenon of acetylene and excessive gas content detected in the insulation oil of a 500kV transformer in a certain power plant. It is preliminarily judged that acetylene is generated by intermittent arcing inside the transformer. The excessive gas content is caused by poor sealing and leakage, incomplete degassing and exhaust before the transformer is put into operation, and residual gas gradually entering the transformer oil after the transformer is put into operation. Based on the analyzed cause of the fault, preventive measures such as strengthening daily inspections, investigating potential hazards, and conducting mass spectrometry detection are proposed.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.