Issue |
E3S Web Conf.
Volume 385, 2023
2023 8th International Symposium on Energy Science and Chemical Engineering (ISESCE 2023)
|
|
---|---|---|
Article Number | 02028 | |
Number of page(s) | 5 | |
Section | Green Chemical Technology and Energy Saving and Emission Reduction | |
DOI | https://doi.org/10.1051/e3sconf/202338502028 | |
Published online | 04 May 2023 |
Numerical simulation of the influence of different oxygen concentration on the combustion characteristics of double tangential boiler at low load
School of Energy and Environment, Southeast University, Nanjing, 210096, China
a* 315309827@qq.com
b* 101002378@seu.edu.cn
In order to cope with the demand for deep peak regulation of high-parameter coal-fired units, this paper uses numerical simulation methods to systematically explore the influence of different secondary wind oxygen enrichment concentrations on the combustion performance and characteristics of singlefurnace double-cut round boilers during low-load operation, so as to provide theoretical support for the actual operation of power plants. The results are as follows: (1) The use of oxygen enriched secondary air combustion during low-load operation of the boiler can improve the overall temperature of the main combustion zone of the furnace and the local temperature of the burner nozzle section, and enhance the combustion stability of pulverized coal in the furnace. (2) When the secondary air oxygen concentration is 35% and 40%, the overall temperature of the main combustion area of the boiler increases the most obviously, and the combustion is the most stable. (3) Oxygen-enriched combustion effectively reduced the NOx emission concentration in the furnace, and the overall trend of NOx emission decreases first and then increases with the increasing trend of secondary air oxygen concentration.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.