| Issue |
E3S Web of Conf.
Volume 390, 2023
VIII International Conference on Advanced Agritechnologies, Environmental Engineering and Sustainable Development (AGRITECH-VIII 2023)
|
|
|---|---|---|
| Article Number | 05036 | |
| Number of page(s) | 8 | |
| Section | Chemical, Ecological, Oil-and-Gas Engineering and Natural Resources | |
| DOI | https://doi.org/10.1051/e3sconf/202339005036 | |
| Published online | 01 June 2023 | |
The process of mixing and heat exchange of dry dispersible substances
1 Bukhara Engineering-Technological Institute, Bukhara, Uzbekistan
2 Shahrisabz branch of Tashkent Institute of Chemical Technology, Shahrisabz, Uzbekistan
* Corresponding author: fayozabdullaev@mail.ru
Dry dispersible substances are used as raw materials in almost all branches of production, mainly in chemical, pharmaceutical, food, construction and other industries. Therefore, there is always a need for facilities that process this product. One of the most important of these devices is the mixer. First of all, it is an important task to create efficient and energy-efficient mixers suitable for the product type and production process. Mixers are based on the process of mixing. We used a horizontal mixer to mix the dry dispersible substances and also installed a cooling shell in the mixing zone. Based on laboratory experience, we considered the process of wet mixing of dry substances. In the process of mixing, the dependence of the degree of mixing on the design of the mixers was studied. The dependence of the power required during the mixing process on the frequency of mixing was studied. In the process of mixing the mixture, the dependence of cooling water consumption was studied. In the process of mixing, the product obtained in laboratory conditions fully meets the requirements. The created device meets the production requirements and has been determined to be economically efficient.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.