| Issue |
E3S Web Conf.
Volume 391, 2023
4th International Conference on Design and Manufacturing Aspects for Sustainable Energy (ICMED-ICMPC 2023)
|
|
|---|---|---|
| Article Number | 01168 | |
| Number of page(s) | 10 | |
| DOI | https://doi.org/10.1051/e3sconf/202339101168 | |
| Published online | 05 June 2023 | |
Electrochemical Machining Process Using Different Electrolytes for Improved Process Efficiency
National Institute of Technical Teacher’s Training and Research (NITTTR), Chandigarh 160019, India
* Corresponding author: gurwinder.mech20@nitttrchd.ac.in
Electrochemical machining (ECM) was developed as a result of the manufacturing and production industry's need to cut extremely hard alloys without leaving a troublesome layer. Manufacturing industries involved in gas turbine blades and aerospace need intricate geometries that would be difficult to make using standard methods. Because of high tool wear (TW) and metal removal rate (MRR), traditional machining processes such as milling and other conventional machining are inefficient for extracting metal from hard materials. This study outlines, a comprehensive analysis of the ECM processes using different electrolytes for better process efficiency.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.