Issue |
E3S Web Conf.
Volume 391, 2023
4th International Conference on Design and Manufacturing Aspects for Sustainable Energy (ICMED-ICMPC 2023)
|
|
---|---|---|
Article Number | 01193 | |
Number of page(s) | 8 | |
DOI | https://doi.org/10.1051/e3sconf/202339101193 | |
Published online | 05 June 2023 |
Structural behaviour of triple blended high-performance concrete
Civil Engineering Department, GRIET, Hyderabad, Telangana, India
* Corresponding author: repatimohan@gmail.com
After water, concrete was the material for construction that is used on the largest scale on the planet, and as an outcome of technological development, concrete's qualities have evolved over time. A study was carried out to investigate the potential use of mineral admixture as a partial replacement in high performance concrete. Since they can significantly improve concrete strength and durability properties when compared to regular Portland cement supplemental cementations materials (SCM) like Alccofine (AF) and ground granulated blast furnace slag (GGBFS) have all been used as cement replacements on a large scale over the past three decades. As a result, HPC can be produced using lower water to powder ratios by including other cementitious materials as admixtures. In this project phase, ground granulated blast furnace slag (GGBFS) and Alccofine (AF) have been employed in varied weight ratios to substitute cement to produce high strength M40 grade concrete for 7, 14, and 28 days of compressive strength (CS) as well as split tensile strength (STS) the percentages of replacement of AF of 5%, 7.5% & 10% also GGBFS percentages are 10%, 12.5 % and 15% respectively used in this project work.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.