| Issue |
E3S Web Conf.
Volume 392, 2023
II International Conference on Agriculture, Earth Remote Sensing and Environment (RSE-II-2023)
|
|
|---|---|---|
| Article Number | 01049 | |
| Number of page(s) | 8 | |
| Section | Issues of Sustainable Development of Agriculture | |
| DOI | https://doi.org/10.1051/e3sconf/202339201049 | |
| Published online | 06 June 2023 | |
Stability of feeding cylinder shell under torsion in pneumo-mechanical spinning machines
1 Karshi engineering-economics institute, Karshi, Uzbekistan
2 Karshi Branch of the Tashkent University of Information Technologies named after Muhammad Al-Khwarizmi, Uzbekistan
* Corresponding author: uzakovzafar40@gmail.com
The essence of the pneumo-mechanical spinning method lies in the transformation of the tape into a discrete stream of fibers, in the formation of a wedge-shaped ribbon from this stream in the form of an open end in the groove of the spinning chamber and in the formation of yarn from the ribbon by torsion, which is removed from the chamber and wound into a bobbin. Yarn obtained on a rotor spinning machine differs in structure from yarn from ring spinning machines, it has a lower breaking load and is produced with a higher filling twist.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.