| Issue |
E3S Web Conf.
Volume 395, 2023
International Scientific and Practical Conference “Ensuring the Technological Sovereignty of the Agro-Industrial Complex: Approaches, Problems, Solutions” (ETSAIC2023)
|
|
|---|---|---|
| Article Number | 01003 | |
| Number of page(s) | 6 | |
| Section | Creation and Use of Modern Digital, Intelligent, Robotic Systems, Machines and Technologies, New Materials and Methods of Design, Processing of Big Data and the Internet of Things in the Agro-Industrial Complex | |
| DOI | https://doi.org/10.1051/e3sconf/202339501003 | |
| Published online | 06 June 2023 | |
Substantiation of the helicoid fertilizer dispenser parameters
Stavropol State Agrarian University, Stavropol, Russia
* Corresponding author: dnk713@mail.ru
The article presents the results of research on a new design of a helicoid dispenser that allows to apply various types of mineral fertilizers in compliance with the requirements for uneven fertilizer application. The material for the study was ammonium nitrate and ammophoska. The dispenser consists of two cylinders with a helicoid surface located between them. The advantage of the design is that the helicoid shape of the dispenser eliminates the cramped state of fertilizer granules during their movement and provides the required application rate range. Studies have shown that with the maximum diameter of fertilizer granules dGmax = 6 mm, the number of entries of the helicoid surfaces will be equal to three, the inclination angle of the helical line of the coils n = 14 degrees. Based on analytical studies, the parameters and operating modes of the helicoid dispenser are substantiated, which allow reducing the unevenness of mineral fertilizers up to 3.4% and increasing the device productivity.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.