| Issue |
E3S Web of Conf.
Volume 401, 2023
V International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2023)
|
|
|---|---|---|
| Article Number | 01085 | |
| Number of page(s) | 8 | |
| Section | Hydraulics of Structures, Hydraulic Engineering and Land Reclamation Construction | |
| DOI | https://doi.org/10.1051/e3sconf/202340101085 | |
| Published online | 11 July 2023 | |
Calculation of mass transfer process in vertical sedimentation tank and construction of CFD model
Tashkent State Transport University, Tashkent, Uzbekistan
The development of a numerical model of mass transfer in a vertical pion is considered. The reconstruction was carried out in a room with a three-dimensional exchange of contaminants and a potential flow. Clear contrast plans were used for numerical integration. The results of the numerical study are presented in this paper. A quirk of the constructed numerical demonstration is the plausibility of agent-based calculation of structures in three-dimensional space. An auxiliary development of this work should be carried out by creating a mass transfer control model in settling tanks based on the model of a culminating liquid jet in a tornado vortex.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.