| Issue |
E3S Web of Conf.
Volume 401, 2023
V International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2023)
|
|
|---|---|---|
| Article Number | 04018 | |
| Number of page(s) | 11 | |
| Section | Mechanization, Electrification of Agriculture and Renewable Energy Sources | |
| DOI | https://doi.org/10.1051/e3sconf/202340104018 | |
| Published online | 11 July 2023 | |
Method of orientation of solar panels of solar power plant
Tashkent State Technical University, Tashkent, Uzbekistan
* Corresponding author: sherzotmirzabekov@gmail.com
The generation of electricity by solar photovoltaic batteries depends on the angle of incidence of sunlight and is maximum when this angle is 90 degrees, i.e., rays fall strictly perpendicular. The greater the deviation from the 90-degree angle, the more radiant energy is reflected rather than extinguished by the solar modules. Therefore, it is especially important to correctly orient the surface of solar modules and set the desired inclination angle. To place photovoltaic panels on the site of a solar power plant, it is necessary to calculate their mutual shading, considering the design and dimensions of one solar cell panel and the method of its installation on the ground at a certain calculated angle.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.