Issue |
E3S Web of Conf.
Volume 401, 2023
V International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2023)
|
|
---|---|---|
Article Number | 04022 | |
Number of page(s) | 9 | |
Section | Mechanization, Electrification of Agriculture and Renewable Energy Sources | |
DOI | https://doi.org/10.1051/e3sconf/202340104022 | |
Published online | 11 July 2023 |
Analysis of stress-strain state of bogie frame of PE2U and PE2M industrial traction unit
Tashkent State Transport University, Tashkent, Uzbekistan
* Corresponding author: sherzaminabdurasulov@gmail.com
This article presents the results of the theoretical analysis of the stress-strain state of the industrial traction unit PE2U and PE2M frame. The stress-strain analysis was performed using the finite element method in SolidWorks Simulation software. The analysis results are necessary to estimate the residual resource of the traction units at the end of their service life and extend their service life. According to the requirements of the state standards, to extend the service life of the rolling stock load-bearing constructions, the stress-strain state of these constructions should be studied. A 3D model of the bogie frame was built using SolidWorks software to evaluate the strain-deformation state. Using the SolidWorks Simulation program, the stress-strain state of the bogie frame was evaluated using the finite element method based on the Palmgren–Miner–Mises theory. All static and dynamic loads in use affecting the bogie frame are taken into account.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.