| Issue |
E3S Web of Conf.
Volume 401, 2023
V International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2023)
|
|
|---|---|---|
| Article Number | 05038 | |
| Number of page(s) | 6 | |
| Section | Engineering Materials Science, Intelligent Transport Systems and Transport Logistics | |
| DOI | https://doi.org/10.1051/e3sconf/202340105038 | |
| Published online | 11 July 2023 | |
Mathematical simulation of process of curing auto-filler based on unsaturated polyester resin
1 Namangan State University, Namangan, Uzbekistan
2 Tashkent University of Applied Sciences, Tashkent, Uzbekistan
3 Tashkent State Transport University, Tashkent, Uzbekistan
* Corresponding author: abdusalom@inbox.ru
In this article, with the help of mathematical modeling of the curing rate, the influence of factors directly affecting the curing processes of an auto-filler prepared based on unsaturated polyester resin was studied: the concentration of the accelerator, hardener, and temperature. When modeling the process, the accelerator, hardener, and temperature concentrations were taken as the initial (input) parameters, and the curing rate of the auto-filler at various temperatures was taken as the final (output) parameter.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.