Issue |
E3S Web of Conf.
Volume 401, 2023
V International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2023)
|
|
---|---|---|
Article Number | 05050 | |
Number of page(s) | 9 | |
Section | Engineering Materials Science, Intelligent Transport Systems and Transport Logistics | |
DOI | https://doi.org/10.1051/e3sconf/202340105050 | |
Published online | 11 July 2023 |
Results of analysis of physical and chemical composition of sludge sediments in Langar and Kalkama flood reservoirs of Kashkadarya region
1 “Tashkent Institute of Irrigation and Agricultural Mechanization Engineers” National Research University, Tashkent, Uzbekistan
2 Tashkent Institute of Architecture and Civil Engineering, Tashkent, Uzbekistan
3 Xian Electric Engineering Co, LTD, Tashkent, Uzbekistan
* Corresponding author: yangiev_asror_63@mail.ru
The article presents the results of field research to determine the physical and chemical composition of sediments in the Langar and Kalkama reservoirs in the Kashkadarya region. Data on the volume of floods in Langar, Kyzylsuv, Kalkama, and Dehkanabad flood reservoirs in 2015-2021 were presented, and it was noted that in Langar in 2019, there were 3 times more floods than in 2015. The granulometric content of turbid sediments in the middle part of the Langar flood reservoir is 29.93% from 0.005-0.002 mm, 21.36% from 0.01-0.005, 21.36 from 0.05-0.01 mm, 25.35% from 0.1-0.05, 0.25-0.1 mm to 0.6%, 0.5-0.25 mm to 0.8%, 1.0-0.5 to 0.6%, i.e., the amount of particles smaller than 0.05 mm reaches 98%. This figure is 94-95% in front of the flood reservoir's upper and water discharge part. It is justified that mud from the Langar flood reservoir can be used as a building material in brick factories due to its high viscosity, and mud from the Kalkama flood reservoir can be used in construction as fine sand due to its low viscosity.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.