| Issue |
E3S Web of Conf.
Volume 402, 2023
International Scientific Siberian Transport Forum - TransSiberia 2023
|
|
|---|---|---|
| Article Number | 03033 | |
| Number of page(s) | 8 | |
| Section | Mathematical Modeling, IT, Industrial IoT, AI, and ML | |
| DOI | https://doi.org/10.1051/e3sconf/202340203033 | |
| Published online | 19 July 2023 | |
Hardware and software system for monitoring the modes of the finishing operation on automatic machine
1 ITMO University, Department of Instrument-Making Technology, 197101 Saint-Petersburg, Russia
2 PJSC Techpribor, Department of the Chief Technologist, 196128 Saint-Petersburg, Russia
* Corresponding author: sayudin@itmo.ru
The prerequisites of the market and competition requires the efficiency of production of industrial enterprises. This requirement can be met by the tools of Industry 4.0. But many enterprises have unique technological equipment without the ability to connect digital solutions such as IIoT and Supervisory Control and Data Acquisition (SCADA). IIoT and SCADA enables monitoring of the equipment condition, which makes it possible to monitor technological process compliance with required modes, as well as the technical state of the equipment. The paper presents the development of software and hardware systems to eliminate this gap. The paper presents the scheme of the hardware and software system for monitoring the finishing machine, which contains sensors for monitoring the technical and technological characteristics of the machine and recording, analysing and visualizing data using the Winnum Platform. The double-acting finishing machine is a special class of equipment that allows to obtain a surface with precision quality. The presented hardware and software system can be used for other finishing machines with a similar design.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.