| Issue |
E3S Web of Conf.
Volume 402, 2023
International Scientific Siberian Transport Forum - TransSiberia 2023
|
|
|---|---|---|
| Article Number | 10014 | |
| Number of page(s) | 8 | |
| Section | Transport Mechanical Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/202340210014 | |
| Published online | 19 July 2023 | |
Dustiness assessment at reinforced concrete articles production in LLC “Monolit-Yug” shop
1 Institute of service and business (branch) Don state technical University in town Shakhty of Rostov region, Russia
2 Shakhty Road Institute (branch) YRSPU (NPI) named after M.I. Platov in town Shakhty of Rostov region, Russia
* Corresponding author: VADmitrienko@rambler.ru
The aim of the paper is to determine fine fractions content of mineral particles formed during the production of building materials. The production of concrete and reinforced concrete products is associated with the use of dispersed mineral substances in large quantities as aggregates. This is accompanied by dust emissions and, accordingly, air pollution. The efficiency of aspiration systems at enterprises is low due to the specifics of the location and operation of the equipment complex in space and time. Therefore, an attempt was made to develop a method for separating dust fractions when assessing the working area dustiness in the production of concrete and reinforced concrete products. Since the main method of assessing dust content is gravimetric, it is proposed to isolate the most dangerous dust particles for the human body when taking air samples with blocks by means of three filters from various filter materials. The performed calibration in laboratory conditions and measurements directly at the workplaces of LLC “Monolit-Yug” showed relatively small errors in air sampling and made it possible to estimate the total dust content and the proportion of fine dust fractions. The conducted research will be used for recommendations development to improve the efficiency of aspiration systems.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.