| Issue |
E3S Web of Conf.
Volume 402, 2023
International Scientific Siberian Transport Forum - TransSiberia 2023
|
|
|---|---|---|
| Article Number | 10017 | |
| Number of page(s) | 6 | |
| Section | Transport Mechanical Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/202340210017 | |
| Published online | 19 July 2023 | |
Profiling the cam of the centrifugal screwdown structure of the V-belt variator
1 Moscow Polytechnic University (Moscow Polytech), 107023 Moscow, Russian Federation
2 The Moscow Automobile And Road Construction State Technical University (MADI), 125319 Moscow Russian Federation
* Corresponding author: mamist-man@rambler.ru
We consider the problem of profiling the cam of centrifugal pressure device of the driving pulley of V-belt variator which parameters and, first of all, profile would allow to create the optimal axial forces corresponding to the required mode of the transmission operation. A methodology for determining the required optimum axial forces from the condition to ensure the best traction ability of the belt transmission is given.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.