| Issue |
E3S Web Conf.
Volume 404, 2023
International Conference on Electronics, Engineering Physics and Earth Science (EEPES 2023)
|
|
|---|---|---|
| Article Number | 03003 | |
| Number of page(s) | 8 | |
| Section | Applied and Engineering Physics | |
| DOI | https://doi.org/10.1051/e3sconf/202340403003 | |
| Published online | 24 July 2023 | |
Evaluation of waste in seismic metamaterial applications
1 Iskenderun Technical University, Dept. of Electrical and Electronics Eng., Hatay, 31200, Turkey
2 Iskenderun Technical University, Dept. of Civil Eng., Hatay, 31200, Turkey
3 Amasya University, Vocational School of Tasova Yüksel Akin, Department of Motor Vehicles and Transportation Technologies, Amasya, 05800, Turkey
4 Iskenderun Technical University, Dept. of Mechanical Eng., Hatay, 31200, Turkey
* Corresponding author: volkan.akdogan@iste.edu.tr
Within the scope of this study, a simulation study was carried out in order to prove the usability of waste in seismic metamaterial studies. In the study, a square array field application was preferred, and a 3-layer cylindrical pile design was used. In addition, direct contact of waste with soil and direct air is prevented. Within the scope of the study, polypropylene, which is frequently contained in medical products, concrete as a containment layer, and lime materials to prevent leakage of hazardous waste were used as materials. In addition, a design has been made within the soil structure as the ground structure. As a result of the study, it was determined that transmission losses occur in low frequency regions such as 3-10 Hz values due to obtaining partial band gaps. In addition, when looking at the propagation of the vibration waves in the field plane depending on the time, it is seen that the waves are significantly reduced, and the results are promising.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.