| Issue |
E3S Web of Conf.
Volume 410, 2023
XXVI International Scientific Conference “Construction the Formation of Living Environment” (FORM-2023)
|
|
|---|---|---|
| Article Number | 01005 | |
| Number of page(s) | 8 | |
| Section | Modern Building Materials | |
| DOI | https://doi.org/10.1051/e3sconf/202341001005 | |
| Published online | 09 August 2023 | |
Influence of mineral additives on the rheological and strength properties of fine-grained concrete
Immanuel Kant Baltic Federal University, 14 Nevskogo street, 236041 Kaliningrad, Russia
* Corresponding author: asharanova@kantiana.ru
The paper considers 4 types of mineral additives for concrete - metakaolin, silica fume, wollastonite and zeolite - and their influence on the rheological properties and strength of fine-grained concrete, in which part of the cement is replaced by a mineral additive. It is shown that the replacement of 5-10% of cement with active mineral additives with a specific surface area 1.5 times or more greater than the specific surface area of cement (metakaolin, silica fume) leads to a decrease in the flowability of the mixture in proportion to the increase in the amount of additive in the system. When replacing 10% of cement with additives, the specific surface of which relative to cement is in the range of 0.88-1.2 (wollastonite, zeolite), on the contrary, increases the flowability of the mixture. The strength of all samples with mineral additives at 28 days of age was greater than that of the control composition. An increase in strength by 1.7-1.76 times is noted for compositions with the replacement of 10% cement with metakaolin, wollastonite or zeolite.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.