| Issue |
E3S Web of Conf.
Volume 410, 2023
XXVI International Scientific Conference “Construction the Formation of Living Environment” (FORM-2023)
|
|
|---|---|---|
| Article Number | 02001 | |
| Number of page(s) | 8 | |
| Section | Reliability of Buildings and Constructions | |
| DOI | https://doi.org/10.1051/e3sconf/202341002001 | |
| Published online | 09 August 2023 | |
Experimental study of an I-beam reinforced steel sheet pile under axial tension
Moscow State University of Civil Engineering, Yaroslavskoye shosse, 26, Moscow, Russia
* Corresponding author: kalugin_93@bk.ru
This article discusses the connection of a steel sheet pile to an I-beam by welding to increase the horizontal load-bearing capacity. The connection to the I-beam is checked during an experimental study for axial tension. Deformations at reference and maximum loads, as well as stresses in the weld metal and I-beam metal, are recorded. During the tests, the bearing capacity of the welded joints was confirmed, data on plastic deformations of the sheet pile walls under various loads were obtained.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.