Issue |
E3S Web of Conf.
Volume 410, 2023
XXVI International Scientific Conference “Construction the Formation of Living Environment” (FORM-2023)
|
|
---|---|---|
Article Number | 02023 | |
Number of page(s) | 5 | |
Section | Reliability of Buildings and Constructions | |
DOI | https://doi.org/10.1051/e3sconf/202341002023 | |
Published online | 09 August 2023 |
Check of stress values in reinforcement and joints of wall panels
Moscow State University of Civil Engineering, Yaroslavskoye shosse, 26, 129337, Moscow, Russia
* Corresponding author: yulia.kustikowa@yandex.ru
The exterior walls of buildings are subjected to not only forces but also thermal shrinkage effects. These effects are particularly significant for buildings constructed using single-layer and three-layer panels. Temperature forces and deformations occur both within the plane of the outer walls and outside of it. As a result, it is necessary to conduct calculations to ensure that the design solutions for exterior walls made of single-layer and laminated panels are both strong and deformable. These calculations are necessary for frameless buildings with a regular structural scheme. By conducting these calculations, it is possible to verify that the design solutions for exterior walls can withstand the forces and deformations that they will experience during their lifetime.
Key words: three-layer reinforced concrete structures / monolithic binding layers / computer modeling / deformations / stress-strain state / enclosing structures / concrete strength
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.