| Issue |
E3S Web of Conf.
Volume 410, 2023
XXVI International Scientific Conference “Construction the Formation of Living Environment” (FORM-2023)
|
|
|---|---|---|
| Article Number | 02057 | |
| Number of page(s) | 7 | |
| Section | Reliability of Buildings and Constructions | |
| DOI | https://doi.org/10.1051/e3sconf/202341002057 | |
| Published online | 09 August 2023 | |
Synthesis and characterization by experimental and theory research suitable on the CdS and CdO materials
1 “Tashkent Institute of Irrigation and Agricultural Mechanization Engineers” National Research University, Tashkent, Uzbekistan
2 Tashkent State Agrarian University, Tashkent, Uzbekistan
3 New Uzbekistan University, Tashkent, Uzbekistan
4 Nurafshan Branch of Tashkent University of Information Technologies Named After Muhammad Al-Khwarizmi, Uzbekistan
5 Tashkent University of Information Technologies Named After Muhammad Al-Khwarizmi, Tashkent, Uzbekistan
* Corresponding author: mohim@inbox.ru
In this paper, we have compared and analyzed experimental and theoretical research on A2B6 types semiconductor materials CdS and CdO. The XRD spectra of the samples were examined using an atomic force microscope and X-ray diffraction microscopy. During film deposition, the temperature of the crucible with a source (CdS) varied in the range Tsourse ≈ 800 ÷ 850°C, and the substrate temperature was maintained within the range Tp ≈ 250 ÷ 270°C. In this case, to ensure the reproducibility of the structures, a shutter was used, with the help of which the CdS deposition time was set, which ensured that the film thickness was the same from experiment to experiment.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.