Issue |
E3S Web Conf.
Volume 411, 2023
VI International Conference on Actual Problems of the Energy Complex and Environmental Protection (APEC-VI-2023)
|
|
---|---|---|
Article Number | 01021 | |
Number of page(s) | 6 | |
Section | Issues of the Energy Complex | |
DOI | https://doi.org/10.1051/e3sconf/202341101021 | |
Published online | 10 August 2023 |
Thermal mode of the condenser of a pyrolysis bioenergy plant with recuperation of secondary thermal energy
Karshi engineering economic Institute, 225, Mustaqillik street, Karshi, 180100, Uzbekistan
* Corresponding author: urisheva80@mail.ru
The article describes the technological scheme and the principle of operation of a pyrolysis bioenergy plant (PBEP) with a recuperative heat exchanger, which simultaneously provides hot water, gaseous and liquid biofuels to the consumer. The results of mathematical modeling of heat exchange processes in the condenser of a pyrolysis plant are presented in order to identify optimal thermal parameters for cooling the biomass pyrolysis steam. A mathematical model of the heat balance of a “mixing-displacement” type condenser (along the length of the coil) of a pyrolysis plant has been developed for calculating, selecting and thermotechnical analysis of the working cycle of the condenser, which allows to obtain the values of optimal parameters of the temperature regime. The simulation results show that the considered variants of pipes with diameters of 15 mm and 20 mm fully meet the technological requirements of condenser cooling.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.