Issue |
E3S Web of Conf.
Volume 415, 2023
8th International Conference on Debris Flow Hazard Mitigation (DFHM8)
|
|
---|---|---|
Article Number | 02005 | |
Number of page(s) | 3 | |
Section | Experiments and Modeling | |
DOI | https://doi.org/10.1051/e3sconf/202341502005 | |
Published online | 18 August 2023 |
Impact of a dry granular flow against a rigid wall: MPM simulations with a new constitutive approach
1 Department of Civil and Environmental Engineering, Politecnico di Milano, Milan, Italy
2 Department of Architecture, Built Environment and Construction Engineering, Politecnico di Milano, Milan, Italy
* Corresponding author: matteo.zerbi@polimi.it
The dynamic interaction between granular flowing masses and obstacles is a very complex phenomenon involving large displacements and high strain rates. To simulate the event in a continuum-based framework both advanced numerical tools and constitutive relationships are required. In this work, the impact of a dry granular mass against a rigid wall is numerically simulated using the open-source Material Point Method code ANURA3D, while the constitutive model proposed by Marveggio et al., 2021 is adopted for the granular mass. The model accounts for rate and grain packing dependence, which have been shown to be crucial to reproduce the propagation of compression and rarefaction waves inside the mass. The model is capable of reproducing “solidification” and “liquefaction” phenomena observed in the DEM impact tests results already available in the literature.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.