Issue |
E3S Web of Conf.
Volume 415, 2023
8th International Conference on Debris Flow Hazard Mitigation (DFHM8)
|
|
---|---|---|
Article Number | 06005 | |
Number of page(s) | 4 | |
Section | Engineering and Mitigation | |
DOI | https://doi.org/10.1051/e3sconf/202341506005 | |
Published online | 18 August 2023 |
Debris flow mitigation by using biopolymers as a soil stabilizer
1 School of Engineering & Built Environment, Griffith University, Nathan, Australia
2 Department of Civil System Engineering, Ajou University, Suwon-si, Korea
Towards rising the attention to the use of green materials in geotechnical applications, this study aims to introduce carrageenan as a new environment-friendly polymer for slope surface stabilization. A set of experiments were conducted to evaluate the performance of the biopolymer-treated soil to form a resistant surface against the surface erosion and debris flow. samples were tested by changing a variety of effective parameters including biopolymer content, moisture content, curing time, soil type, and durability under wet- dry cycles. Kaolinite soil along with river sand in different combinations were employed and treated by various biopolymer proportions to optimize the biopolymer and soil parameters. Subsequently, the optimum mixture of each biopolymer-treated soil was subjected to 5 cycles of wetting and drying. A broad microstructural study by performing FTIR analysis and scanning electron microscopy (SEM) images was conducted and an analytical model was developed to clarify how biopolymer stabilize the slope surface. The results confirm the successful performance of carrageenan in connecting soil grains, increasing mechanical strength and durability of soil against surface erosion. It can be concluded that carrageenan can be considered as a sustainable alternative to conventional materials such as cement and lime.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.