| Issue |
E3S Web Conf.
Volume 417, 2023
III International Conference on Geotechnology, Mining and Rational Use of Natural Resources (GEOTECH-2023)
|
|
|---|---|---|
| Article Number | 02016 | |
| Number of page(s) | 7 | |
| Section | Geoecology, Geochemistry and Rational Use of Natural Resources, Environmental Protection | |
| DOI | https://doi.org/10.1051/e3sconf/202341702016 | |
| Published online | 21 August 2023 | |
The method of averaging over a movable liquid control volume for some problems of fluid mechanics
1 University of World Economy and Diplomacy, 54, Buyuk Ipak Yuli street, Tashkent, 700007, Uzbekistan
2 Scientific Research Institute of Irrigation and Water Problems, Tashkent, Uzbekistan
* Corresponding author: udalabaev@mail.ru
The paper considers the method of averaging over a movable liquid control volume for some problems of fluid mechanics. The authors study the process of obtaining a solution for the problem of fluid flow with different configurations along the cross section of a pipe with a filled porous medium, as well as flow in an open-flow channel. Obtaining an approximate analytical solution based on a movable control volume is described. The well-known control volume method used in numerical analysis is used considering its displacement. The method of displacement makes it possible to obtain an analytical representation of the solution of the problem under consideration. At the same time, obtaining an analytical solution method is achieved by averaging the equation describing the flows over the control volume. Based on the obtained solution in the limit, we obtain solutions to the problem without considering porous media, and with different pipe cross-sections (flat, round, ellipsoidal and rectangular). With certain configurations of the pipe section, an exact solution is obtained.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.