| Issue |
E3S Web Conf.
Volume 417, 2023
III International Conference on Geotechnology, Mining and Rational Use of Natural Resources (GEOTECH-2023)
|
|
|---|---|---|
| Article Number | 03001 | |
| Number of page(s) | 11 | |
| Section | Energy Saving and Energy Efficiency of Mining Enterprises, Other Industries and Transport Infrastructure | |
| DOI | https://doi.org/10.1051/e3sconf/202341703001 | |
| Published online | 21 August 2023 | |
Use of reactive power sources in improving the quality of electricity
1 Navoi State University of Mining and Technologies, Navoi, Uzbekistan
2 Samarkand State Architecture and Construction University, Samarkand, Uzbekistan
* Corresponding author: togayev.islom@mail.ru
The losses of power and electricity have sufficiently negative and significant impact on air transmission networks. In the supply of electricity and power to electricity consumers the power supply must be reliable and of high quality without interruption. In recent years the process of uninterrupted reliable and high-quality supply of electricity has become extremely complicated. Currently measures are being developed to calculate the solution of this issue as much as possible. The problem of reactive power compensation and the quality of electricity is directly related to the immediately consumer loads, voltage and frequency. It is also a process associated with increasing the value of the system's active power coefficient to balance the total power from the ac network, not decreasing the voltage value, and reducing the harmonic components of large fluctuations in nonlinear industrial consumer loads. Voltage storage is usually required to reduce voltage changes in the power line.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.