Issue |
E3S Web Conf.
Volume 427, 2023
International Conference on Geotechnical Engineering and Energetic-Iraq (ICGEE 2023)
|
|
---|---|---|
Article Number | 02011 | |
Number of page(s) | 9 | |
Section | Structural Engineering and Construction | |
DOI | https://doi.org/10.1051/e3sconf/202342702011 | |
Published online | 13 September 2023 |
Comparison Between the Effects of Straight And Hook Steel Fibers on Fresh and Hardened Characteristics of Concrete
Department of Civil Engineering, University of Babylon, Hilla, Iraq
a* Corresponding author Ban.Ali.engh391@student.uobabylon.edu.iq
b eng.rafea.flaih@uobabylon.edu.iq
This research looked into how steel fiber type and concentration influence Steel Fiber Reinforced Concrete (SFRC) mechanical properties. According to tests, the percentage of steel fibers in SFRC is directly related to compressive, flexural, splitting tensile, and direct tensile strength. Straight and hooked steel fibers with the same aspect ratio, 13 mm in length and 0.2 mm in width of straight steel fibers, and 35 mm long and 0.55 mm wide hook-end steel fibers were utilized. Three different percentages of fiber were used: 0.5, 1, and 1.5% by volume. Seven variants of concrete with different types and different percentages of steel fiber were created and evaluated. At 0.5, 1.0, and 1.5% fiber content, the compressive strength of a cube reinforced with hook steel fibers increased by 1.41, 11.52, and 20.81%, respectively, while the compressive strength of a cube reinforced with straight steel fibers increased by 7.27 and 20%, and 21.4% for the same percentages of steel hooked fiber. This indicates that the straight steel fibers are more effective than the hook steel fibers when increasing the compressive strength of the (SFRC). This means that (pressure force increases, albeit gradually). The concrete's splitting tensile strength may be significantly increased by introducing straight and hook steel fiber into the mixture. The tensile strength is improved by (52.78, 69.44, 122.22%) and (44.44, 62.8, 94.44%) when compared to the control concrete sample. Straight steel fibers increased flexural strength by (44.23, 61.54, 86.54%) compared to the control sample, and hook steel fibers increased flexural strength by (11.54, 28.85, 55.77%). When straight fibers are introduced to the control concrete sample, the direct tensile strength increases by about (54.17, 87.5, 162.5) %, and when hook fibers are added, the direct tensile strength increases by (45.83, 75, and 150%).
Key words: Steel-fiber / Micro steel-fiber / Hooked / end steel-fiber / reinforced concrete
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.