| Issue |
E3S Web Conf.
Volume 427, 2023
International Conference on Geotechnical Engineering and Energetic-Iraq (ICGEE 2023)
|
|
|---|---|---|
| Article Number | 03013 | |
| Number of page(s) | 6 | |
| Section | Transportation Science and Technology | |
| DOI | https://doi.org/10.1051/e3sconf/202342703013 | |
| Published online | 13 September 2023 | |
Mechanical Evaluation of Sustainable Concrete Used in a Concrete Pavement that Production from Iron Filling Waste
Civil Engineering Department, University of Kufa, Najaf, Iraq
a* Corresponding author engzahraanaeem1361995@gmail.com
b mohammedah.aljumaili@uokufa.edu.iq
In this research used iron filling as partial replacement fine aggregate at percent 5,10, and 15% by weight of fine aggregate and maintaining the ratio of water to cement at 40% and study observe that produces concrete with high compressive strength, tensile and flexural strength at replacement percent I10% and production of concrete with a lower coefficient of thermal expansion with continued replacement and thus obtaining the maximum distance between expansion joints at the rate of addition of I15%.
Key words: Concrete / iron filling / coarse aggregate / tensile strength / flexural strength / compressive strength
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.