| Issue |
E3S Web Conf.
Volume 429, 2023
The Third International Conference of Construction, Infrastructure, and Materials (ICCIM 2023)
|
|
|---|---|---|
| Article Number | 05009 | |
| Number of page(s) | 6 | |
| Section | Structural Engineering and Materials | |
| DOI | https://doi.org/10.1051/e3sconf/202342905009 | |
| Published online | 20 September 2023 | |
The effect of using steel slag waste on stability in porous asphalt mixture
1 Department of Civil Engineering, Faculty of Engineering, Universitas Muhammadiyah Yogyakarta, Jl. Brawijaya, Geblagan, Tamantirto, Kec. Kasihan, Bantul, Daerah Istimewa Yogyakarta, 55183 Indonesia.
2 Department of Civil Engineering, Faculty of Engineering, Institute Teknologi Sumatera Utara, Jl. Ryacudu, Jati agung, Way huwi, Lampung Selatan, Lampung, Indonesia.Indonesia
* Corresponding author: anita.rahmawati@umy.ac.id
The road is an access that connects one place to another in one land. According to Law Number 38 of 2004 concerning roads, the definition of a road is a land transportation infrastructure which includes all parts of the road including auxiliary buildings and equipment. But it often happens that road construction is not accompanied by good maintenance, giving rise to various kinds of problems. One of the road damages that occurred in Indonesia was caused by standing water on the road surface. This is because Indonesia has a high level of rainfall. Therefore, the use of porous asphalt as a road surface layer can be used as an effort to deal with this problem. The use of steel slag waste material is to reduce the use of natural aggregates and to reduce B3 waste, which is increasing day by day. In this study, the coarse aggregate retained on the 3/8" and No. 4 filters in the porous asphalt mixture was replaced with steel slag aggregate with variations of 0%, 25%, 50%, 75% and 100% with variations in asphalt content of 5%, 5, 5%,6%, 6.5% and 7%. The purpose of this study was to determine the effect of using steel slag waste on the stability level of porous asphalt pavements. The specification used in this study is the Australian Asphalt Pavement Association (2004). The results of the research that has been done, it shows that the use of steel slag as a substitute for coarse aggregate is retained by the 3/8" and No. 4 on porous asphalt mixtures can increase the stability value of porous asphalt for all variations in existing asphalt content.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.