Issue |
E3S Web Conf.
Volume 429, 2023
The Third International Conference of Construction, Infrastructure, and Materials (ICCIM 2023)
|
|
---|---|---|
Article Number | 05027 | |
Number of page(s) | 6 | |
Section | Structural Engineering and Materials | |
DOI | https://doi.org/10.1051/e3sconf/202342905027 | |
Published online | 20 September 2023 |
Strength of paving block by replacing up to 40% of fine aggregate by weight with plastic waste
1 Undergraduate Program of Civil Engineering, Universitas Tarumanagara, Jl. Letjen S. Parman No. 1, Jakarta, Indonesia
2 Rebricks Indonesia, Jl. Ciputat Raya No.79, Jakarta, Indonesia
* Corresponding author: arifs@ft.untar.ac.id
Plastic waste in Indonesia in 2020-2021 occupies the second largest position in terms of the amount of accumulated waste, namely 17.15% and 15.54% after the type of food waste. Plastic is difficult to degrade or is difficult to decompose in the soil. Plastic dumped into the sea is dangerous. In 2020, Physeter Macrocephalus (protected whale) was found to have died from ingesting plastic and not digesting it properly. Replacing/modifying materials is an alternative to help overcome waste environmental problems in the construction sector. Most of the research using waste is the manufacture of concrete with certain compressive strength criteria. As a form of support for green building, research utilizes plastic waste to replace some of the fine aggregate in the manufacture of paving blocks. This study reviewed the strength class of paving block Grade B or Min. 17 MPa, where fine aggregate is replaced by plastic waste up to 40%. Plastic waste is cleaned and cut into small pieces. The results showed that the replacement of fine aggregate with plastic waste up to 30% still produced Grade B or Min. 17 MPa.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.