Digital Control of DSTATCOM using TI-C2000 Processor and MATLAB/ Simulink for Sustainable Power System Network

¹ Muffakham Jah College of Engineering and Technology, Hyderabad, Telangana, INDIA.
² Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad, Telangana, INDIA.
³ CVR College of Engineering, Ibrahimpatnam, Rangareddy, Telangana, INDIA.
⁴ School of Electronics Engineering VIT-AP University, Amaravati, Andhra Pradesh, INDIA.
⁵ Uttaranchal Institute of Technology, Uttaranchal University, Dehradun, 248007, INDIA.
⁶ KG Reddy College of Engineering & Technology, Hyderabad, Telangana, INDIA.

^* Corresponding author: rafi.eee@mjcollege.ac.in

Abstract

This paper describes the detailed digital control of a Distribution Static Synchronous shunt Compensator (DSTATCOM) using a MATLAB embedded coder for compensation to be in command of Voltage Source Converter (VSC) input voltage, reactive power compensation and the power factor improvement of a secondary radial distribution system with a voltage rating of 11kV/415V and with a capacity of 750 kW. The model has been simulated and tested in MATLAB/Simulink using the Simscape tool block set version of MATLAB R2019a. The same is achieved using a 32-bit DSP TMS320F2812 controller programmed with CCS V 6.1 software and tested with MATLAB embedded coder generation using Texas Instrument C2000 processors. Using this embedded code is developed and dumped into the CCS V 6.1. Real and Reactive power control (PQ) and Back Propagation Control Algorithm (BPCA) are the control methods. BPCA controller is based on the elementary extracted biased value of Reactive Power (Q) and Active Power (P) components of load currents. These current values are necessary for the reference source's current estimation. The reference source currents are estimated from the available source currents to generate firing pulses for the PQ and BPCA controllers. The real and reactive power controller is based on the transformation of synchronously rotating load currents in alpha and beta frames. The BPCA-based DSTATCOM is simulated for linear and non-linear load circumstances and that helps in restoring the power system networks sustainability.