Issue |
E3S Web Conf.
Volume 431, 2023
XI International Scientific and Practical Conference Innovative Technologies in Environmental Science and Education (ITSE-2023)
|
|
---|---|---|
Article Number | 03008 | |
Number of page(s) | 10 | |
Section | Mining, Geology and Geotechnology | |
DOI | https://doi.org/10.1051/e3sconf/202343103008 | |
Published online | 13 October 2023 |
Seismic stress state of a high earth dam using the spectroscopic method
1 Institute of Mechanics and Seismic Stability of Structures of the Academy of Sciences of the Republic of Uzbekistan, street Durmon Yuli, 33, 100125 Tashkent, Uzbekistan
2 The State Unitary Enterprise Center for Space Monitoring and Geoinformation Technologies, Yunusabad 12-27-73, 100180 Tashkent, Uzbekistan
* Corresponding author: klara_51@mail.ru
The reliable and safe operation of earth dams located in seismic regions of the Republic of Uzbekistan requires engineers and researchers to constantly improve the design normative methods for their calculation in order to identify safety margins and stability under various types of loads. A method is proposed for calculating the seismic stress state of an earth dam (on the example of the Pskem HPP being designed), based on the spectral method, in accordance with the current standards for the design of hydro-technical structures in seismic areas. Structural and piecewise non-homogeneous physical and mechanical characteristics of soils of the structure body were provided by Hydroproject JSC of the Republic of Uzbekistan. The results of the calculations show that under a horizontal seismic impact, the dam performs transverse oscillations. It was determined that the maximum vertical stresses are observed in the lower part of the upper slope, where the maximum hydrostatic pressure is reached. The maximum shear stresses appear at the base of the dam and on the surface of the downstream slope, where the risk of loss of strength under shear is greater..
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.