| Issue |
E3S Web Conf.
Volume 431, 2023
XI International Scientific and Practical Conference Innovative Technologies in Environmental Science and Education (ITSE-2023)
|
|
|---|---|---|
| Article Number | 06005 | |
| Number of page(s) | 8 | |
| Section | Industrial Innovation and Decarbonization | |
| DOI | https://doi.org/10.1051/e3sconf/202343106005 | |
| Published online | 13 October 2023 | |
Manufacturing technology of small-sized profile parts
Vyatka State University, Moskovskaya str.,36, Kirov, Russian Federation
* Corresponding author: sergeev@vyatsu.ru
The paper considers the issues of processing small-sized profile parts, in particular, micro milling on a contour-milling machine with CNC. The technology of fixing small parts due to the adhesive connection is proposed. Calculations of the adhesive joint are carried out taking into account the coefficient of safety margin for shear resistance. Experimental studies of contour milling processing were also carried out, as a result of which recommendations were formulated on the choice of processing modes for copper alloy 99.5%Cu. The tool breakage limit is determined under the specified processing conditions. The possibility of using a combination of micro milling and electroerosion treatment is considered.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.