Electromagnetic quality of a linear asynchronous motor with different designs of the secondary element

¹ National Research University «Tashkent Institute of Irrigation and Agricultural Mechanization Engineers», Republic of Uzbekistan, Tashkent
² Karshi Engineering and Economic Institute, Republic of Uzbekistan, Karshi

Abstract

Linear asynchronous electric motors drive the working bodies of the mechanisms directly and quite fully fulfill their drive characteristics, allow eliminating mechanical converters and increase performance. This solves the problem of maximum articulation, splicing of a source of mechanical energy - an electric motor and an executive technological mechanism. Linear electric motors with a massive ferromagnetic secondary are the most cost-effective, taking into account the operating modes - when operating in starting modes and on stop, therefore, in practice, it often becomes necessary to calculate them in a short circuit mode. With a simplified calculation, it is convenient to use correction factors for increasing magnetic fluxes in the yoke, secondary losses and efforts of linear induction motors compared to the same values in a circular analogue. The dependences of such coefficients on the quality factor, the number of pairs of poles and the relative magnetic resistance of shunting. In the general case, the comparison and selection of the design of a linear induction motor is carried out at the stage of preliminary design using the optimality criteria - the quality factor.