| Issue |
E3S Web Conf.
Volume 434, 2023
4th International Conference on Energetics, Civil and Agricultural Engineering (ICECAE 2023)
|
|
|---|---|---|
| Article Number | 03034 | |
| Number of page(s) | 7 | |
| Section | Agricultural Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/202343403034 | |
| Published online | 12 October 2023 | |
Investigation of two-dimensional unsteady motion of deformable raw roller during saw ginning
1 Kattakurgan branch of Samarkand State University, Samarkand, Uzbekistan
2 Tashkent Institute of Textile and Light Industry, Tashkent, Uzbekistan
3 Jizzakh Polytechnic Institute, Jizzakh, Uzbekistan
* Corresponding author: ilhom.abbazov.86@mail.ru
In this article, based on the analysis of research conducted by scientists in many fields on increasing the productivity of sawing gin, the requirements for sawing gin to improve the workability of gin, increase fiber quality, and reduce energy consumption, as well as its separation into technological parts, and a single conclusion, collecting the conducted research it was mentioned that it should be released. It is explained the requirements for cotton ginning equipment in cotton ginning cluster enterprises and the need to carry out the innovative approach of sawing gins, dividing each technological process into separate technological parts to fulfill these requirements. The technological process of the sawmill consists of a complex of 9 technological parts.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.