| Issue |
E3S Web of Conf.
Volume 443, 2023
II International Conference on Environmental Technologies and Engineering for Sustainable Development (ETESD-II 2023)
|
|
|---|---|---|
| Article Number | 04015 | |
| Number of page(s) | 7 | |
| Section | Innovative Technologies of Agriculture, Civil Engineering and Environmental Research | |
| DOI | https://doi.org/10.1051/e3sconf/202344304015 | |
| Published online | 09 November 2023 | |
Study of the influence of oil consumption and changes in key indicators during the operation of diesel and gas engines
1 National University of Uzbekistan named after M. Ulugbek, 4, University Street, Tashkent, 100174, Uzbekistan
2 Karshi State University, 17, kucha-bag. street, Karshi, 180103, Uzbekistan
3 National Research University Tashkent Institute of Irrigation and Agricultural Mechanization Engineers, 39, Kori Niyoziy str., Tashkent, 100000, Uzbekistan
* Corresponding author: utaev.s@list.ru
When operating diesel engines, carburetor engines and diesel-based gas engines, carcinogenic substances contained in the lubricating oil accumulate in the exhaust gases. The content of carcinogenic components is different for diesel engines and gas engines based on diesel engines. During the operation of internal combustion engines, motor oils affect the environment with various types of pollution, as a result of waste, evaporation, leaks and spills. In these cases, the content of contaminants depends on the design, operating mode, operating conditions of the oil and its chemical composition. It has been experimentally established that the highest oil consumption is about 80-90% through the gaps in the parts of the cylinder-piston group. As the load increases, an increase in oil flow is observed. As a result of oil leaks through sealing materials, environmental pollution occurs.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.